Pinoy adventure
Registered User
- Messages
- 1,279
Just trying to get true to SSE to activate our smart meter has put me off signing up to a smart meter plan.
I can no longer submit my meter reading on the app so now have too ring them in
It’s almost impossible to compare now with all the different pricing structures, rates for different times, smart/non smart, free days, peak non peak blah blah blah.
Which isn't possible without the smart meterI don't think the Smart meter can take the plaudits here, it's more the Smart meter pricing plan
Obvs, but from the threads here a lot of people think that the rates for the smart meter will result in higher billsI don't think the Smart meter can take the plaudits here, it's more the Smart meter pricing plan
Thanks SueWell done on the mathsInteresting to see that the Smart meter worked out better.
Yes I did and I have to say it's a great little tool for helping with choosing which plan might be the best one to go forJust wondering if you have punched the figures on that energypal.ie website? You can play around with creating a calculation of your own and use the different discount rates that have applied.
It's on their "Our tariffs & prices" page of their website and its called "Yor loyalty Tariff"Never heard that before. Where did ya see/hear that?
That's not bad to be honest, I only use 200kw per month.Two choices with BG, free Saturday or Sunday elecy {up to 25kw per week AFAIK or 100 kw per month, they don’t call that out in marketing blubber} Smart metering. Been on the Smart plus night boost for 4 bills or 8 months and will never go back to level pay.
Bills are controllable, manageable and less than the level pay
The initial activation is carried out by the installer, so it starts communicating with ESB Networks. Anything after that is a configuration change.Apologies if this has been dealt with above, but how DOES one 'activate' the meter exactly? I ask because when I signed up for current plan about 13 months ago I had a day/night meter.
What MCC code is displayed on your current bill?But when I tried to switch to SSE I was told the MPRN flags as eligible for smart plans only.
That's all very useful info. The MCC code on bill is MCC12. It was originally MCC02 alright but I see from looking back at the bills that it changed to MCC12 in January of this year (after smart meter was installed). However I did not have a 'smart' plan, just the the same day/night plan in place before the meter swap. Is there a way to have the configuration reverted?The initial activation is carried out by the installer, so it starts communicating with ESB Networks. Anything after that is a configuration change.
Later, you can switch to a 'smart' plan, at which point your meter configuration will change from MCC01 (or MCC02 for day/night meters) to MCC12 or MCC16. Once you switch to a smart plan, you are restricted to choosing other smart plan, though flat 24 hour rates are now available.
What MCC code is displayed on your current bill?
As far as I know you can't go back to MCC01/MCC02 from MCC12/MCC16. I don't know if this is CRU or ESB Networks policy or what but I don't think that such a reversion is possible.That's all very useful info. The MCC code on bill is MCC12. It was originally MCC02 alright but I see from looking back at the bills that it changed to MCC12 in January of this year (after smart meter was installed). However I did not have a 'smart' plan, just the the same day/night plan in place before the meter swap. Is there a way to have the configuration reverted?
As far as I know you can't go back to MCC01/MCC02 from MCC12/MCC16. I don't know if this is CRU or ESB Networks policy or what but I don't think that such a reversion is possible.
I have a smart meter that was installed earlier this year and I didn't "activate" it so am still on MCC02 day/night Nightsaver mode because it still seems to be the most economical for my usage patterns (night storage heaters and immersion heating, no solar etc., no electric vehicle, c. 5,000 kWh units p.a. with c. 60% at night).
You must have (possibly inadvertently?) chosen to "activate" it after installation. You don't have to be on a smart plan even if you're on MCC12/MCC16.I am just wondering why my meter was reconfigured to MCC12 then as I don't have a smart plan. I guess I will get back to ESB Networks about it.
I got on to ESB Networks and they told me that the supplier (YUNO) had changed (reconfigured?) the meter to MCC12, and this happened about two months into my day/night plan with them (at which point a smart meter had been installed but I had not changed to a smart plan).You must have (possibly inadvertently?) chosen to "activate" it after installation. You don't have to be on a smart plan even if you're on MCC12/MCC16.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?