Hi SLF. I've 19 doors and Ennis is about 3 hours from da big smoke.
Hi SLF. I've 19 doors and Ennis is about 3 hours from da big smoke. Thanks again for the offer of help.
Hi sabre, I'm not so sure about repositioning the hinges. Wouldn't this leave door recessed by 6mm on the other side and not flush with door frame ?
Repositioning the hinge side will position the whole door 5 mm below the frame surface. But presumably the lock side is already 5 mm below the frame surface , otherwise the door will rattle between the door face and frame rebate. Traditionally best practice for hanging doors was always to hang the door below the frame surface, this always gave a straight aesthetic line around the door frame, even if there was a slight misfitting of the door, or if the door twisted or warped slightly over time.
sabre
Ennis
if you can't get those slips of wood to do it my clever way, then take the second best way.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?