G
Our builder dropped the level of three of our rooms by 2 to 3 inches thinking we were going to put battons to secure our timber floors. Concrete is now poured over our underfloor heating so no going back.Question is can we pour another layer of concrete to have our floors level or will this affect the effeciency of our heating?
You must have very tight loops to get it down to 30 degrees, most installations run about 40 degree, otherwise you would not achieve the 20c in the room temperature.
yes the loops are fairly tight and i also used high quality foil backed insulation. at 30 it rarely goes over 17-18. when set to 40 it can go a good bit higher. im still at the experimenting stage
The way you could get away with a thin screed is to put batten down and pour between, at least the weight will be carried on the battens
Don't really understand what this will achieve? You are effectively introducing even thinner weak spots in the screed if you go this route, and to no effect. The screed will crack at every batten location and the battens serve no function anyway.
a) Leave the floors with a drop 0f 2 to 3 inches (call it a feature!)
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?