Shower tray dimensions

[Pope John 11]

Looking for a shower tray with the dimensions of 1050x795. The nearest to this is 1190x795 in B&Q.

Does anyone know where I could get such dimensions in a shower tray. I am looking to locate this in the existing toilet room in my house which has an exact length dimension of 1050.

Any help appreciated

 

[DavyJones]

You could stick in a 1000 and put a strip of tile to make up the lenght. Or use a 1100 and chase it into the wall 30 mm either side.

More importantly, can you get a door to match opening?

 

[Pope John 11]

Totally forgot that I need to run the 4 inch toilet waste in a box above ground floor level in the vicnity of this 1050mm width. Therefore its looking like using a 900mm square shower tray, with 150mm allowed for the waste pipe.

Is it best to tile over this 150mm zone & form it as part as part of the shower.

 

[rmdt]

How about placing the shower tray on top of the pipe. That way you get the full width tray although you would have a step into it.

If going with the option you suggested of a narrower tray you will need to be very careful to ensure a good seal in this area.

Some kind of tanking system may actually be a better option, and you could do without any shower tray if you wanted this way.

 

[Pope John 11]

How about placing the shower tray on top of the pipe. That way you get the full width tray although you would have a step into it.

If going with the option you suggested of a narrower tray you will need to be very careful to ensure a good seal in this area.

Some kind of tanking system may actually be a better option, and you could do without any shower tray if you wanted this way.

I have no porblems doing this however the location of the shower tray is under the existing stairflight & therfore the height is restricted