+1the problem with using a blender on your mash is that you can end up over working the starch, and wind up with something resembling wall paper paste.
hhhmmmm...Ill have to have a look next time at what the weight is. Its roughly the same amount of meat as you'd get off a chicken (if it were boned and rolled).
You can adjust the slice thickness so I have mine set to what is a weeks worth of slices - in our case thats enough meat for 4 sandwiches a day, Mon to Fri, so 2 large slices a day or 3 or 4 smaller ones (obv the slices from the centre are wider). I tend to get around 12-16 slices off it. I could go thinner and get 20 or so slices off it.
Check out the prepacked ham section in Tesco - they sometimes have special offers (Supervalu do too sometimes) - where you can get two hams for a tenner - if I see that I buy 2 and freeze one.
Obviously it depends on size, but the size I tend to buy is the 6ish euro mark.
I used to slice by hand before I got the gadget, but I find the gadget is more economical, as my own slicing used to include large unsightly chunks, some slices too thin, some too thick etc....
Presume you could also cook the hams, slice them and then freeze the slices to use at will (if, say, you're not using the whole lot in one week)?
stupid question alert. Do boil all the meat or cook it in the oven? Thinking chicken or beef would be nicer roasted but would boil the ham.
I bought a hamburger press in NYC a couple of years ago.
[broken link removed]
Use your hands!Any idea where I might get one of these in Irealnd.
Had a quick look online & a single metal one at about €20 + another € 10 for shipping.
There are some plastic ones for about €10 (including shipping)....do you reckon the metal is necessary/worth the extra cost? I know you'd have it for life, but I'm talking about making 4 burgers every couple of weeks & the odd BBQ.
Any idea where I might get one of these in Irealnd.
Had a quick look online & a single metal one at about €20 + another € 10 for shipping.
There are some plastic ones for about €10 (including shipping)....do you reckon the metal is necessary/worth the extra cost? I know you'd have it for life, but I'm talking about making 4 burgers every couple of weeks & the odd BBQ.
Also - re the mash & mixer, they only go starchy if you over-mix them (same can happen with a regular masher). Drain the spuds, dry them off abit, put in some butter & milk/cream (also, if you fancy some garlic & spring onion) and mix of about 20-30 seconds - I'm well know for my mash (but I reckon my roasties are better!!!)
The secret of good mash is to boil the potatoes in their skins, keeping the water out of the flesh, and peel them before you mash them.
You're the guy buying the burger pressDear Lord - I have a life!!!
Plus I'd never have the patience to let them cool down enough before peeling.....I'd have to get your wife to check out my burnt mitts!!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?