T
Input controls the amount of charge the heater stores up overnight. Try setting this to the maximum initially. Output controls (well sort of - it's a bit hit and miss with storage heaters) the amount of heat emitted during the day. If you are out all day and only in in the evening set this to min while out and then to medium or max when you get in. If you are there all day then set it to low or medium. The amount of charge stored up may also depend on any room thermostat(s) installed and their setting. In general the idea is that the output should be cranked up when you want a boost of heat from the storage part of the heater. That's the theory anyway! As I say it's all a bit hit and miss but if the property is well insulated (e.g. Goldshield) then it may not matter as much of the heat will be retained.Inside are two dials with numbers 1 to 6 on them. One says 'output' (left side) and the other one says 'input' (right side).
Sounds like it's a dual mode storage and convection heater. The idea being that the storage heater provides the background heating and the output can be used to give a boost (it basically opens vents over the storage heater blocks allowing more heat to escape) but sometimes you may need to switch on the convection part of the heater (which uses electricity there and then unlike the storage part which uses night rate electricity overnight) or a fire or whatever to give more heat. The dial on the side may be a heat setting for the convection part. Not 100% sure.Additionally there is another dial on the right side of the heater, also with numbers from 1 to 5 on it. There is a switch as well (red, 1 and 0 on it).
I presume that's the storage heater switch. If that is the case then nothing will happen immediately but if you leave it on overnight it will charge up. However you will want to double check this in case it's something else and you run up a huge bill overnight testing this!On the wall next to the heater are two switches. One says 'offpeak' and nothings seems to happen if I use it.
That's the convection heater part and uses electricity immediately.The other turns obviously the heater on, but can anybody please explain the whole thing to me?
My guess is that you need to switch the other switch on and leave the heater charging overnight with the input set to max (or whatever) and the output set to low.I would like the heater to use the cheaper night rate and then give heat in the evenings. What do I have to do that this happens?
I'll try my usual source (the domestic appliance parts place on North Frederick Street) for the part or advice on where to get it if it proves necessary.
What timer? You mean the one that switches over from the day to night meter?We think it might be something to do with the timer.
If you think that the meter is faulty then call the ESB. Otherwise it's your own responsibility so call a sparks.Can anyone tell me who i should contact- the ESB maybe?
What do you mean by "storing heat during the day"? This is what they are supposed to do. Do you mean that they are using electricity during the day and not just charging up on night rate electricity? Yes, Normally they store heat during the night on economy 7, not during the day, but mine are. They keep clicking on, using the electric to store more heat. If so how are you verifying that this is the case? One of the heaters continued to store during the day and ended up overheating and burnt out. This has been replaced by a new heater, but is still heating up during the day!Do you have dual day/night meters as would normally be the case with storage heaters (which will charge up on night rate between 11/midnight and 8/9AM)? The meter was changed from a very old one to this new digital one. It has 3 rates on it...rate 1, 4, and 8. I don't understand why it has 3 rates? I thought it would just have the 2 rates...the old meter did! Was the meter change done by a qualified electrician? Yes! Why did you need a new meter installed? In short - not enough info.
Reading your post makes me suspect you're in the UK.
Most if not all of the advice you will get here relates to Ireland.
Storage heating is controlled differently in the UK, so you would have a better chance of getting an answer on the excellent UK electrical forum
Diynot
From your description I think you may be talking about a time switch rather than a meter.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?