Hi.
I've searched the threads and haven't found any similar topics so I'll try to be as brief and thorough as possible.
I'm in a 4 bed semi-d for last few years with extension to kitchen. The extension has 3 rads in it. Only one is working and leaves the kitchen and extension very cold.
I started with bleeding the rads and the water went through but they cooled quickly again. I then turned off every other radiator in the house and the 2 heated very quickly and fully.
I've heard the term balancing, but as soon as I turn on a single other radiator these 2 loose heat and go cold. My heater pressure is around the 2 mark. Normal operating is indicated as between 1.5 and 2.5 so pressure is fine. Any help would be greatly appreciated,
Blake
I've searched the threads and haven't found any similar topics so I'll try to be as brief and thorough as possible.
I'm in a 4 bed semi-d for last few years with extension to kitchen. The extension has 3 rads in it. Only one is working and leaves the kitchen and extension very cold.
I started with bleeding the rads and the water went through but they cooled quickly again. I then turned off every other radiator in the house and the 2 heated very quickly and fully.
I've heard the term balancing, but as soon as I turn on a single other radiator these 2 loose heat and go cold. My heater pressure is around the 2 mark. Normal operating is indicated as between 1.5 and 2.5 so pressure is fine. Any help would be greatly appreciated,
Blake