problem with tiling around shower tray

[KS1]

got a shower unit tiled a few months back but noticed recently that the plastic piece between the tray and the tile is after lifting off the tray and the water appears to be going in underneath resulting in the grout going black in places.just wondering those anyone know a way of dealing with this problem or should i contact the tiler again

 

[elcato]

I dont understand. If the seal between the tiles and the tray has lifted from the tray, the water should be going in underneath the shower tray. What has the grout going black got to do with this problem ? Grout in showers generally after a while, does get dirty and needs cleaning (usually an old toothbrush is good for cleaning it off). You could try sealing the seal strip yourself by getting a tube of Silicon. You can buy them now ready squeezable (for want of a better word) without needing a silicon gun to do the job. Put a line of silicon along the tray where the seal strip should lie and press down for a minute or so till it sets.

 

[Sue Ellen]

This previous thread re grout cleaner/sealer might be of interest.

If you run the search option in this forum you may well find some previous threads that might help with your problem re shower tray.