How to remove service warning indicators (thanks to mondeoman)

Hi Mondeoman,

Do you know how to remove the warning on a '05 SEAT Altea.

Thanks

5Times
 
5Times said:
Hi Mondeoman,

Do you know how to remove the warning on a '05 SEAT Altea.

Thanks

5Times
Click to expand...


There is No info on Autodata about The 'ALTEA'?? ,but you can try the Ibiza if you want.


Ibiza instructions(02-06)

1-press & hold the trip reset stalk(beside speedo)

2- switch ignition 'ON'

3-the word 'service' will appear in the trip recorder display.

4- Release trip stalk

5- turn stalk to the 'Right' untill '....' appears in the display

6-release stalk.

7-Switch ignition 'OFF'


I hope this works for you.
 
 
So hold the RH stalk in the down position, turn on the engine, release the stalk and move the Lh stalk up as if you are indicating to turn right
 
Mondeoman,
Could you sort this one for me , 2003 bora service light ,how to remove?

Cheers
 
Hi there Mondeoman,

can you help me with this.

My 2005 1.6 Renault Scenis was left up for about 3 months and when I went to start it, the battery was dead, so I used Jump leads to get it going.

From then, the 'Spanner' symbol was showing as well as 'SERVICE' and the 'Parking Brake' Symbol.

I found your advice on removing the 'Spanner' symbol, but can't figure out how to remove the 'SERVICE' and 'Parking Brake' symbols .

Any ideas ?

Thanks in advance,

Tom
 
Hello
can you help me please.i've got a Mercedes CLK 230 kompressor.w reg
with the serviice spanner on.thanks
david
 


If the warning is 'SERV' then this is a malfunction indicator & not a service indicator lamp,'SERV' lamp indicates a problem with the vehicle,sorry
 
Ron Burgundy said:
how about a 2007 VW Passat ??
Click to expand...

I could not find anything on my Autodata.

but i did find this -

The following reset my service computer on my 2007 VW Passat 2.0T:
1) Hold down the wrench button (right hand of the trip reset button).
2) While holding the wrench button, turn on the ignition.
3) The computer will now show something like: 'Service Now'.
4) Release the wrench button.
5) Now, press and release the the min (right hand of the h button).
6) Turn off the ignition.
7) Done. The service computer is now officially reset.
The following reset my service computer on my 2007 VW Passat 2.0T:
1) Hold down the wrench button (right hand of the trip reset button).
2) While holding the wrench button, turn on the ignition.
3) The computer will now show something like: 'Service Now'.
4) Release the wrench button.
5) Now, press and release the the min (right hand of the h button).
6) Turn off the ignition.
7) Done. The service computer is now officially reset.
 
Any idea how to remove service indicator on 2005 9-3 Saab 1.9 tdi sport?

Unreal thread re the number of people you have helped.
 
InfoSeeker said:
Any idea how to remove service indicator on 2005 9-3 Saab 1.9 tdi sport?

Unreal thread re the number of people you have helped.
Click to expand...

Hi,
could you please send me your email address via PM.because i don't know how to post attachments
 
You must log in or register to reply here.
Menu
Log in
Register