How to remove service warning indicators (thanks to mondeoman)

dawnsurprise

Registered User
Messages
148
have a renault meganue cabrio....
got it serviced locally, i.e. not with a renault dealer
how do i remove the spanner symbol or reset the computer to remove this symbol without going to a renault garage???
 
Re: removal of spanner symbol on dashboard of renault megane cabrio

most garages should be able to do this for you. ring around a few local ones... one might do it for you for nothing or perhaps jut charge you 1/2 hours labour. They just have to hook a doodad up to it and press a few buttons.
 
Re: removal of spanner symbol on dashboard of renault megane cabrio

have a renault meganue cabrio....
got it serviced locally, i.e. not with a renault dealer
how do i remove the spanner symbol or reset the computer to remove this symbol without going to a renault garage???

1-switch ignition ON (lights)
2-press button on end of stalk(RH)until spanner symbol flashes & distance remaining to next service appears in the odometer display.
3-press & hold the little stalk on dash display(trip reset) for 10 secs until new service interval is displayed.let go of stalk.
4 turn ignition off.
this is for megane 2 2003 onwards as you never said what year yours was.
 
Re: removal of spanner symbol on dashboard of renault megane cabrio

thanks a mil mondeoman - that did the trick!
 
removal of spanner from peugeot 307 SW without going to garage

Apologies if this thread appears twice
i cant seem to find it even though i know i posted it...

my husband has a peugeot 307SW year 2005
how do we remove the spanner symbol without going to a garage
(we service the car locally - not at a peugeot dealer)
 
Re: removal of spanner from peugeot 307 SW without going to garage

Apologies if this thread appears twice
i cant seem to find it even though i know i posted it...

my husband has a peugeot 307SW year 2005
how do we remove the spanner symbol without going to a garage
(we service the car locally - not at a peugeot dealer)


Here goes-
1,switch ignition OFF,
2,press & hold trip reset stalk(instrument cluster)
3,Switch ignition ON
4,keep pressed for 10 secs,
Display will now read 0 and 'spanner' symbol will go out
 
Re: removal of spanner from peugeot 307 SW without going to garage

or do a homer and put a piece of tape over it
 
Re: removal of spanner from peugeot 307 SW without going to garage

once again you have come up trumps mondeoman.... thanks :)
 
Re: removal of spanner symbol on dashboard of renault megane cabrio

Have similar problem on a 99 A4, says 'Service' when I switch on the ignition. I tried the solution here but no joy. Any ideas?
 
Re: removal of spanner symbol on dashboard of renault megane cabrio

Have similar problem on a 99 A4, says 'Service' when I switch on the ignition. I tried the solution here but no joy. Any ideas?


is it 'OIL' in the display??
if so -
1,press & hold the RH stalk (instrument cluster)
2,switch ignition ON
3,the letters OIL will appear in the instrument display
4,release the RH stalk
5,pull out the LH stalk for aprox 2secs to reset the display.
 
Re: removal of spanner symbol on dashboard of renault megane cabrio

Thanks mondeoman, I'll try that. The stalk on the left is for the analog clock, so not sure if it'll work but I'll give it go!
 
Re: removal of spanner symbol on dashboard of renault megane cabrio

Thanks mondeoman, I'll try that. The stalk on the left is for the analog clock, so not sure if it'll work but I'll give it go!

Lets know how you get on please;)
 
hi mondeoman
any idea how to remove the service light off on an audi a3 year is 2005 or where to go to get it done i live in cork
many thanks
 
hi mondeoman
any idea how to remove the service light off on an audi a3 year is 2005 or where to go to get it done i live in cork
many thanks
Hi m8,
try this,
1,switch ignition on
2,pull & release the trip stalk(RH),a spanner symbol or the word service will appear in the display within 5 secs
3,pull & hold trip stalk until the message "..." or "service in ....KM... days" appears in the display
4,release trip stalk,
5,switch ignition OFF.;)
 
thanks for the reply mondeo man but can you tell me what i am doing wrong steps 1&2 fine but when i do step 3 all thats happens is the wipers and the window washer come on (filled up twice with water i held it so long).Am i doing it wrong thanks for your time
 
thanks for the reply mondeo man but can you tell me what i am doing wrong steps 1&2 fine but when i do step 3 all thats happens is the wipers and the window washer come on (filled up twice with water i held it so long).Am i doing it wrong thanks for your time

Hi m8,
Are you using the trip reset stalk in the instrument cluster on the RH side??.
what size engine is in you A3?
 
Back
Top