Yep, that sounds like the problem. Check the manual for an option to switch from [broken link removed] output.
With our DVD player if I take the signal out of the scart it comes out in B&W but if I take a signal from the phono output it comes out in colour.
Don't know why but it works fine out of the phono output.
ruam
[SIZE=-1] Will a SCART lead give me full color pictures?
A SCART lead has 21 pins which have many uses. Unless the SCART lead is wired for RGB, then the NTSC picture will appear on a PAL television in black and white. This is because the SCART lead is only wired for composite video and not RGB. With an RBG SCART lead, both PAL and NTSC Playstation pictures will be displayed in a full sharp color.[/SIZE]
Could also be a 10 pin SCART which imits RGB signals rather than a 21 pin SCART which includes them. This relates to the wiring - both variants will have a full 21 pin connector. Without opening up the cable/connector it may be difficult to say. Try another SCART lead if possible.
Update: see here.
Could also be a 10 pin SCART which imits RGB signals rather than a 21 pin SCART which includes them. This relates to the wiring - both variants will have a full 21 pin connector. Without opening up the cable/connector it may be difficult to say. Try another SCART lead if possible.
Update: see here.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?