1/2 Acre Site: Our engineer did not measure it but thinks its 1/3 of an acre.

A

August

Registered User
Messages
78
We have just put a deposit down to secure a half acre site.

We brought our engineer down the other day and while he did not measure it correctly he seems to think its only a third of an acre (it does look a bit small).

I spoke with the auctioneer who ensures me that he measured it himself and its a half acre. He has sent out the maps detailing that it is a half an acre.

If the map clearly states its a half an acre would this be correct?
 
Re: Land Size

You need to get the site properly surveyed. Get the engineer back to do this and then you will know the true position. Its unlikely that the map you were given is an official survey document but of course this is possible. Either way get a professional survey done.
 
Re: Land Size

The auctioneer is not qualified tio measure the area of the site. If you look closely at his brochure I am sure you will find a disclaimer covering his ass! Why did your engineer not measure it? Get him to do so now. The Auctioneer is acting for the Vendor not for you. If the Land is less than half an acre you will not get planning and you would be paying residential prices for agricultural land. Get it measured by some one qualified who will stand over their work!!
 
Re: Land Size

I assume that you are buying it subject to PP as otherwise it would be expensive grazing.
 
Re: Land Size

You'll need to get them anyway so go to OSI and get planning pack which will contain a 1:2500 map of the site. Hopefully the site will be marked up up on that map, if not usually there is a local surveyor who does housing sites for around €100 euro and will do a proper measurement. Some of the laser scans/men in vans can cost thousands.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an acre.

Why would you not get planning on 1/3 acre? Why does it need to be 1/2 acre anyway, this makes no sense to me - not everybody wants a 1/2 acre, due to a big garden etc.

I am not suggesting the OP accept 1/3 acre if it is being advertised at 1/2, but if it is 1/3 then he could get it for less, assuming he gets planning.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an acre.

Im sure your engineer knows this but, heshould note that leagally land is measured to the middle of a boundary which sometimes is the middle of a public road, this could take up a significant amount of land.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an ac

Thanks for the replies. We were/are buying it subject to planning. Just received the maps in the post and it doesn’t outline what size it is. I spoke with the engineer and he said that he can go back down but he knows himself that it’s definitely only a third. If it is a third which chances are it more than likely is then we are difinately overpaying for the land. My husband just called the auctioneer who passed on the number of the engineer who measured the land first day. The auctioneer said that the engineer who measured it thinks that there is even more than a half there!!
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an acre.

At the risk of repeating what was already advised here...............

Pay your engineer to measure the land

When he says it is a third of an acre does he mean 0.3333333333333 acres or 0.333333333332 ac or 0.3333 ac or .333 or .331 or .3 or .29? Use your head. How can he know how big it is if he does not measure it? Answer he cannot know. Measure it and move on to the next stage of the purchase, if there is to be a purchase!!!
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an ac

beaky said:
Pay your engineer to measure the land
Click to expand...
Yes, pay an engineer or a land surveyor to determine the area of the site.
beaky said:
When he says it is a third of an acre does he mean 0.3333333333333 acres or 0.333333333332 ac or 0.3333 ac or .333 or .331 or .3 or .29?
Click to expand...
An experienced engineer/land surveyor will generally be able to make a fairly good guess. When shown a flat rectangular plot of land which is fenced off they would have a very good idea of its acerage.

If it is a rectangular marked out plot whats to stop you from measuring the length and width and calculating the area yourself?

beaky said:
How can he know how big it is if he does not measure it? Answer he cannot know.
Click to expand...
If the plot boundaries exist on the OS map then he would be able to scale the map and determine the acerage.[/quote]


beaky said:
Measure it and move on to the next stage of the purchase, if there is to be a purchase!!!
Click to expand...
Agreed, generally a site like this would not be sold on a price per acre basis . You would need to offer the vendor an amount for the site.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an ac

August said:
The auctioneer said that the engineer who measured it thinks that there is even more than a half there!!
Click to expand...
This is the same auctioneer who originally told you he'd measured it himself, right?
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an ac

Check the land registry www.landdirect.ie


As far as I know If doesnt matter what is pegged out, what counts is what is marked on the landregistry map accompanying contracts
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an ac

August said:
Just received the maps in the post and it doesn’t outline what size it is. I spoke with the engineer and he said that he can go back down but he knows himself that it’s definitely only a third.
Click to expand...

The plot size is not outlined on the OS map.

The OP maintains the engineer is definate that there is only a thrid of an acre in it yet the OP feels this is not sure enough as it was not measured. I agree. One cannot be sure of the size on visual inspection alone. I would not purchase a tank of heating oil based on someone having a failry good guess that there was 1000 Lt in it, let alone the site for my future home.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an acre.

It is usually a matter for the Vendor to produce a map of the plot with the area certified so in a sense if you pay your own engineer you are wasting your money if you can get the vendor to do it.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an acre.

If the problem is that the boundary outlined on the map does not amount to a half acre when the sale is for a half acre then you should insist on getting your half acre.

If the problem is that the site seems to have been incorrectly pegged out then this should be confirmed by measurement of the pegged out area, at your own expense if you are disputing it.

My opinion now is, pay your engineer to measure the plot as marked on the map, if it is not certified by an engineer, (the Auctioneer may not also be an engineer) and if you have doubts about the transfer of the measurements to the land itself, pay him to measure the land area pegged out.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an acre.

Hi,

Just thought Id update ye on the developments. We managed to get in contact with the engineer who originally measured the site for the seller. Turns out he measured it from the road and also measured a small farm road which actually isn’t included in the site. If you subtract the farm road and the main road you are still only left with a little over a 1/3 of an acre (our engineer was bang on) .

Can anyone advise why a site is measured from the road? Joe Quimby you mentioned something about it in your last post however I don’t really understand how this can happen?
 
It's very simple- it's because most of the time you actually own out to the centre of the road. For all the good it does you! There are exceptions to the rule.
 
Re: Half Acre Site: Our engineer did not measure it but thinks its one third of an acre.

plaudit said:
Why would you not get planning on 1/3 acre? Why does it need to be 1/2 acre anyway, this makes no sense to me - not everybody wants a 1/2 acre, due to a big garden etc.
Click to expand...

Unless the OP is on mains sewerage (unikely) then there are planning conditions that determine the minimum distance that a septic tank needs to be from the house and the boundaries. To satisfy these conditions you need a half acre.

J.
 
You must log in or register to reply here.
Menu
Log in
Register